Wisefab Toyota Supra Mk5 A90 Rear Drop Knuckle Suspension Kit
Description
Toyota Supra A90 Wisefab rear drop knuckle suspension kit for your new mk5 Supra - 2019 onwards
- The kit provides massively improved kinematics on a lowered car using a higher roll center, revised camber gain, anti-squat and bumpsteer for maximum grip.
- Easy camber adjustment.
As the top links are straight tubular type, then camber can be adjusted simply by changing the length. - Bump steer adjustment.
You can simply adjust bump steer by changing rod end location in a slot. - Anti-squat adjustment possibility.
You can adjust anti-squat by changing the top forward link height on upright. It can be done in less than 10 minutes at the trackside. Lowering link would increase anti-squat, raising it would decrease anti-squat. - Original wheel speed sensor (ABS sensor) can be used.
- Only takes either M model or 336mm or bigger brake discs.
Smaller brakes will not fit. - Wheel bearing size should be 45x85x41
Kit includes:
- Pre-set suspension links.
- Uprights with hardware.
- Subframe bushings with spherical bearings.
Component fitment
- Wheel bearing: OEM rear wheel bearing can not be used, it has to be sourced from BMW E90. Only the bigger size wheel bearing can be used 45x85x41. Part number 33416775842.
- Wheel hub: Wheel hub has to be sourced from BMW E90 and should be for the bigger wheel bearing. Part number 33416760058.
- Wheels: Wheel hub has 5x120 PCD. This means that OEM wheels can not be used.
- Brakes: Brakes has to be from BMW E90 with 336 mm brake disc or BMW E90 M3. OEM brakes do not fit.
- Strut: OEM fitment ride height adjustable coilovers must be used.
- Driveshaft has to be from BMW E90 or E90 M3 or an aftermarket one that fits E90
Estimate shipping for this item
Loading...
Estimate shipping for this item
Update shipping information to see available shipping methods.
,
-